Every hot tub is different. Get a free step-by-step plan for yours.
Get My Free PlanIf you won’t be using your hot tub for an extended period over the winter, you’ll need to close down and winterize your spa. This includes removing all the water from the tub, draining out all of the water from the plumbing and jets, and, in some cases, adding antifreeze. If you don’t properly winterize, you risk equipment and pipe damage in freezing temperatures.
Here’s how to decide when to winterize, what supplies you need, how to properly winterize your hot tub step-by-step, and how to protect your spa during the winter if you decide to keep it running.
Want a physical copy of these steps? Check out the Hot Tub Handbook (or keep reading for the tutorial).
When to shut down or keep your hot tub running in the winter depends on whether you can maintain it. Can you keep the water regularly balanced, heated, and circulating? If you can’t, it might be time to winterize your spa.
Winterizing your spa doesn’t mean turning off the power and leaving your hot tub full of water. Without proper circulation and filtration, your spa water can become stagnant, slimy, and unsanitary. Also, if the water isn’t heated in the winter, your hot tub plumbing is at risk of freeze damage.
Here’s when to consider closing down your hot tub:
Timing your spa’s winterization is important, too. Plan to winterize your hot tub in late fall or whenever temperatures remain above freezing. If it’s freezing outside and you try to winterize your hot tub, you risk the water freezing as you drain the spa.
In addition to your regular hot tub draining and cleaning supplies, you’ll need a wet/dry vacuum with both blower and vacuuming functions. I recommend a wet/dry vacuum that’s at least 5 hp to help blow out all of the water from the plumbing. Pool-grade antifreeze is also helpful but optional.
Start your winterization when temperatures are comfortably above freezing and you have several hours available. Follow each step carefully and take your time. Depending on the size of your hot tub, the entire process should take two to three hours. Before winterizing your hot tub, read your owner’s manual for instructions specific to your spa model.
Proper winterizing means closing up a clean hot tub without any water in the system. This means there’s no water in the tub, pipes, pump, heater, or any internal equipment where water passes through. Any leftover water in your system can freeze and damage your plumbing, so it’s important to be thorough and take the time to winterize the entire spa thoroughly.
Clean your hot tub as much as possible before closing it down. Leaving the plumbing and surfaces with biofilm and grime just means you’ll need to work extra hard to purge and clean everything when it’s time to reopen and refill.
Remove all of your filter cartridges. Soak them overnight or for up to 24 hours in a filter cleaner solution. Then, store them in a clean, dry location. If you need a tutorial on filter cleaning, check out our How to Clean Hot Tub Filters guide.

Before draining any water, add a
If you need more help using a
Shut off the power to your hot tub at the breaker. This will ensure the hot tub doesn’t kick on when you close it down.
To drain your hot tub, use a sump pump and/or a hose connected to your spa’s drain valve.
Once the sump pump and drain have removed as much water as possible, vacuum out any remaining water in the foot well with a wet/dry vacuum. You’ll be vacuuming again later, but try to remove as much as possible from the foot well for now.
Your spa may have two drain valves: a primary and an auxiliary valve. Use the primary valve to drain out the water from the tub itself. Once the water is drained from the tub, use the secondary valve to drain the internal lines.
Wipe down your hot tub shell and surfaces using a hot tub surface cleaner or diluted white vinegar. Then, rinse with a hose. Remove any rinse water with a wet/dry vacuum. Before closing up your spa, clean the underside and top of your cover. Check out How to Clean a Hot Tub Cover for more help cleaning a cover.
Open your jets all the way. Set your diverter valve to the middle position so all the jets and seats are open and receive water. Then, using the blower function on your wet/dry vacuum, insert the vacuum hose inside the filter well and into the filter intake. Turn the vacuum on and blow out any water in the lines. You should see water spraying into the tub from the jets. If you have more than one filter well, repeat for each one and continue blowing until the water stops spraying.
Loosening the connections in your plumbing will help drain any remaining water and condensation from the lines. Open the hot tub’s equipment access panel and locate your pump and spa pack (also known as the control pack, which includes the heater). For this part of the process, ensure the gate valves are open to the pump.
Loosen any unions that attach the PVC pipe to the pump. Then, loosen any unions on either side of the spa pack. Use your wet/dry vacuum to remove any water from the PVC pipes, the pump, and the heater. Finally, remove any drain plugs from your pump. There should be little to no water draining out at this point.
Using the suction function on your vacuum, vacuum up any water in your jets, fittings, or other features. Ensure all the jets remain open and your diverter valve is in the middle position. Then, place the vacuum hose against each jet and run the vacuum for 10 to 15 seconds. This will help remove any water inside the jets. Work your way around the entire hot tub, removing water from every jet.
If there’s any remaining water in the foot well or on the seats, use your wet-dry vacuum, a hand pump, or an absorbent towel to remove it. There should be no more visible water anywhere.

Now that all the water has been drained from your hot tub lines, replace the drain plug on the pump, tighten all the unions, and open all the gate valves leading to and from the pump and the spa pack.
As an additional step to protect against potential freeze damage, add pool-grade or marine-grade antifreeze to your hot tub’s plumbing system. Antifreeze prevents any remaining water left in the lines from freezing.
Pour one gallon (three to four liters) of antifreeze into the filter well. You may need up to two gallons (seven to eight liters) for larger hot tubs.
How much antifreeze to use:
I recommend buying two gallons regardless of your spa size. It’s better to have extra than to run short halfway through the process.
It is safe for use in all potable and seasonal water lines. It protects systems down to -100° F, extreme cold weather, with a No Burst Guarantee.
Apply a small amount of antifreeze directly to your jet fittings. You can gently squeeze the jug next to each jet fitting or add antifreeze to a spray bottle and spray it into each jet opening. Pool-grade or marine-grade antifreeze is safe to use in hot tubs. However, you must remove it from the plumbing before you use your hot tub again.
Replace the drain plug on the pump. Retighten all unions by hand (plus about 1/4 turn with pliers is sufficient). Open all gate valves to their normal operating positions.
SAFETY WARNING: Only use pool-grade or RV/marine-grade antifreeze (propylene glycol). NEVER use automotive antifreeze (ethylene glycol)—it’s highly toxic and dangerous.
Close and secure the equipment panel door. Then, use straps or locks to secure your hot tub cover. This helps prevent the cover from blowing off during the winter.
Use a cover guard or tarp over your hot tub to help prevent water from seeping into the spa. This also makes removing snow or ice on your cover easier if it accumulates. If you use a tarp, ensure it’s weighted or secured properly so it does not blow away in the wind.
To protect your hot tub cover from snow and ice damage, remove snow regularly with a soft-bristled brush or broom. This prevents excess weight from damaging the cover or causing it to sag. Use a cover guard or tarp over it to prevent melting snow from leaking through the cover into your drained tub, where it could freeze and reach your plumbing. Use caution when removing ice, since this can tear your tarp or cover guard.
If you have a saltwater, inflatable, or outdoor hot tub with a wood cabinet, there are a few extra considerations when winterizing:
Follow the step-by-step winterizing process with one additional step: remove your salt cell. Unplug your salt water generator, take out your salt cell, and store it indoors. If you see white calcium buildup on the metal plates of the cell, clean it by soaking it in a solution of water and
Inflatable spas are actually simpler to winterize. After draining and drying the interior thoroughly, deflate the spa and fold it for indoor storage. Never leave an inflatable spa set up outdoors in freezing weather. The material can become brittle and crack or tear.
After following the step-by-step winterizing process, apply a wood protectant or sealant to your cabinet as your final step. Waterproof sealant helps prevent cedar and redwood cabinets from cracking during freeze-thaw cycles.
Don’t want to winterize? If you keep your hot tub running in freezing temperatures, you must keep your spa heated, circulating, properly covered, and protected from extreme weather. Here are a few precautions to take in extremely cold weather:
Answer a few questions and we'll tell you what to test, what to add, and when.
Get My Free PlanMatt is the founder of Swim University. He's been in the pool and spa industry since 1996. His mission is to make pool and hot tub care easy. Each year, he continues to help people with water chemistry, cleaning, troubleshooting, and more.
Learn how to keep your hot tub from freezing in winter. Protect your spa from costly freeze damage with these proven prevention methods and tips.
The cost of heating a hot tub in winter is about $30-$60 per month. So, here’s how to cut your energy costs of running a hot tub...
Learn how to drain your hot tub for winter, where to dispose of the water safely, and the complete steps to winterize your plumbing and equipment.
Whether this is your first time at the hot tub rodeo or you're a little out of practice, we're here to help you start your hot tub quickly and easily.
Here are the top-rated hot tub winter covers that prevent heat loss and withstand heavy snow. Compare foam density, materials, and reinforcement options.
Hot tub winterization costs about $200, depending on the supplies you already own. Here are the expenses and the cost of winterizing versus keeping your hot tub running.